My Apple Stickers - How to apply your sticker

1. Prepare the surface
Clean the surface with a dry piece of cloth or towel.

 

2. Prepare your Apple Sticker
Lay your Apple Sticker on a table or any other flat surface and rub firmly over it using a credit card. It will be easier this way to remove the transparent transfer tape with the vinyl decal attached on it, from the white backing paper.

 

3. Design your Apple Sticker (Applied for vinyls with multiple pieces)
If necessary cut the pieces with a scissor. Then follow the steps bellow for each of the pieces.

 

4. Prepare to apply
Pull the transparent transfer tape with the vinyl decal attached from the white backing paper. If any of the graphics remains on the backing paper, re-stick the transfer tape and rub firmly over it with your card.

 

5. Apply and press
Apply the transparent transfer tape with the vinyl decal on your mac and use your card to press over the entire surface. Pressing from the center towards the edges of the vinyl decal will remove air bubbles.

 

6. Almost ready!
Slowly remove the transparent transfer tape. Start from one edge and slowly remove the whole tape. If any part of the graphics is still attached on the transfer tape re-stick and press once more with your card. If air bubbles were created, you can poke them using a needle and then smooth it out.

Footer Banner
My Apple Stickers is a Verified Paypal Merchant

 

Copyright © 2017 myapplestickers.com  |  Created by vinylize.gr

 

Apple logo is a trademark of Apple Inc. | Our products are not affiliated with Apple Inc.